AGT-SSHH-680A Skid Steer 680 Hydraulic Concrete Breaker Attachment-agrotkindustrial

AGT Skid Steer 680 Hydraulic Concrete Breaker | AGT-SSHH-680A

Availability:

Out of stock

Sold out

$2,422.00

$2,422.00 - $2,422.00

$2,422.00

$2,528.90

$2,528.90 - $2,528.90

$2,528.90

Quantity

Please cotact us for the extra tax if you want to ship to Canada ! (usually $200-500)

Note:

Get $100 off your first purchase.
code: U 100 off

No tax will be charged.

Recommended nitrogen pressure: 210 PSI
The tank is empty, you need to rent a nitrogen tank or add nitrogen yourself
Click here to see how to add nitogen (11:00-17:00)
Drill Rod: Purchase Here

Manual

Click here for more about our skid steer breaker

You can replace the breaker rod with the post driver rod.

Technical Details

Operating weight	550 lbs
Working pressure	210 psi
Working flow	9.5-16 GPM (36-60 L/min)
Impact rate	500-900 BPM
Impact energy	600 joule
Chisel diameter	2.7" (68mm)
Hydraulic hose diameter	1/2"
Ear spacing - inside	10.2" (258mm)
Ear spacing - outside	11.4" (290mm)
Pin center to center	8.8" (224mm)
Package Dimensions	50.39" × 24.01" × 23.62"
Shipping weight	870.82 lbs

Description

The Skid Steer Concrete Breaker, featuring a 2.7" chisel, is perfect for tasks that require both light and medium effort, making it popular among demolishers, landscapers, and those working on construction sites.

With the striking power of up to 400-900 Blows Per Minute.

680 Skid Steer Concrete Breaker has Maximized power-to-weight ratio breaking strength

The nitrogen-charged operation provides superior braking efficiency

Bottom tie rod bolted design provides easy maintenance

Tool bushing for quick, easy replacement

Quick-change lugging configuration design

Solutions to common problems

The hammer is not working after the installation

Improper bushing replacement. Refit the inner bushing. Make sure to use the original.
Quick couplers are installed wrong. Check connectors and replace them as needed.
Supply hoses have been reversed. The pressure line from the pump must be connected to the port marked IN. The return line connects to the port marked OUT.
Nitrogen pressure is too high, Release nitrogen and recharge as needed.

Why does the hydraulic hammer suddenly stop hammering?

The backhead pressure is too high. Release nitrogen and recharge as specified.
The backhead is filled with oil. Disassemble the back head and replace the seal.
The control valve is stuck. Disassemble and clean the valve, and replace the worn valve.
Oil flow is not sufficient. Repair the pump, and adjust the hammer valve.